Your kitchen faucet is one of the most used fixtures in your home. When it drips, leaks, loses pressure, or simply looks outdated, it affects both function and appearance.
Zest Plumbing & Drain provides professional kitchen faucet installation and repair services in Scottsdale and surrounding areas. Whether you’re upgrading to a modern pull-down faucet, replacing a worn-out unit, or fixing a persistent drip, we handle the job cleanly and correctly.
We don’t just swap fixtures, we inspect connections, supply lines, shutoff valves, and surrounding kitchen plumbing systems to ensure everything operates safely and efficiently.
We install and service all major brands and styles.
A dripping faucet wastes water and can increase your utility bill. We repair:
If the issue extends beyond the fixture, we can perform targeted plumbing repairs to correct the underlying cause.
Upgrading your faucet improves efficiency and style. We install:
We remove the old unit, inspect mounting surfaces, verify secure supply line connections, and test for leak-free performance before we leave.
If you’re remodeling, we coordinate installation with broader plumbing installation services to ensure proper alignment and code compliance.
Installing new countertops or sinks? We ensure your new fixtures are:
We also inspect nearby components like garbage disposals and drain lines to prevent future problems.
Water under the sink often traces back to worn valves or supply lines. We inspect:
If needed, we can provide leak detection services to prevent cabinet or flooring damage.
Scottsdale’s hard water accelerates mineral buildup inside faucet cartridges and aerators. Over time, this causes:
If you’re replacing fixtures, pairing your upgrade with one of our water softener solutions can significantly extend the life of your plumbing system.
Addressing these problems early prevents larger plumbing repairs.
When it comes to fixture installation, details matter. We make sure it’s done right the first time.
Yes. We install customer-supplied faucets regularly. Before scheduling, confirm a few things to avoid surprises on installation day. Check the number of mounting holes in your sink. Most kitchen faucets use one, two, or three holes depending on the configuration, and the faucet you purchased needs to match. If your sink has extra holes from a previous installation, deck plates can cover them, but it is worth knowing upfront. Also confirm your supply line connections are standard size, and if you are installing a pull-down or touchless faucet, verify there is adequate clearance under the sink for the weight counterbalance or battery pack. Customer-supplied fixtures are not covered under our labor warranty if the fixture itself proves defective, since we have no control over the equipment we did not supply. We will flag any compatibility concerns before starting work.
A dripping kitchen faucet almost always comes down to a worn internal component rather than the faucet itself being at the end of its life. In single-handle faucets, which are the most common in Scottsdale kitchens, a worn or damaged cartridge is the primary cause. The cartridge controls the mix of hot and cold water and seals the water flow when the handle is in the off position. When it wears out, water bypasses the seal and drips from the spout. In Scottsdale specifically, mineral scale from hard water at 16 to 20 grains per gallon accelerates cartridge wear by depositing inside the valve body and on the cartridge sealing surfaces. Two-handle faucets use ceramic disc valves or compression stems that fail in similar ways. In most cases a cartridge replacement resolves the drip completely without replacing the entire faucet.
A standard kitchen faucet replacement is typically completed in one to two hours. That includes shutting off the water supply, removing the old faucet and supply lines, inspecting the mounting surface and shutoff valves, installing the new faucet, connecting supply lines, and testing for leaks before finishing the job. If the shutoff valves under the sink are old, corroded, or not closing fully, replacing them adds time but is worth doing while the water is already off and the cabinet is accessible. If the new faucet requires additional holes in the sink or countertop, that affects the timeline as well. For straightforward like-for-like replacements with a customer-supplied faucet and shutoff valves in good condition, one hour is a reasonable expectation.
Yes, and it is one of the most common reasons kitchen faucets in Scottsdale wear out faster than their rated lifespan. Scottsdale’s municipal water runs 16 to 20 grains per gallon, which is well into the very hard category. Mineral scale deposits inside the faucet body, on the cartridge, and in the aerator over time. Scale on the cartridge sealing surfaces causes drips and handle stiffness. Scale in the aerator restricts flow and reduces pressure at the spout. Scale on internal brass components causes pitting and corrosion that eventually leads to leaks at the base or handle connections. Faucets with ceramic disc cartridges and solid brass construction hold up better against hard water than lower-grade faucets with plastic internal components. Pairing a faucet upgrade with a water softener installation is the most effective way to extend fixture lifespan and protect the investment long-term.
Repair makes sense when the faucet is in good structural condition and the problem is a worn cartridge, a failed O-ring, a loose connection, or a clogged aerator. These are inexpensive fixes relative to the cost of a new faucet and installation. Replacement becomes the better call when the faucet body itself is corroded, cracked, or pitting at connection points, when mineral scale has built up inside the valve body to the point where a new cartridge will not seal correctly, when the handle mechanism is failing rather than just the valve, or when the faucet is older and has required multiple repairs in a short period. We diagnose the actual cause before recommending anything. If a cartridge replacement will solve the problem on a faucet that is otherwise in good shape, that is what we will recommend. We will not push a replacement to sell a fixture.
We install all major residential faucet brands including Moen, Delta, Kohler, American Standard, Grohe, and Pfister, as well as premium brands like Brizo, Waterworks, and Rohl that are common in Scottsdale’s higher-end kitchen remodels. We also install customer-supplied faucets from any manufacturer. For homeowners upgrading in a hard water environment, we generally recommend faucets with solid brass construction and ceramic disc cartridges, which hold up better against mineral scale than faucets with plastic internal components. Pull-down and pull-out models work well for most households. If you have questions about which features to prioritize for Scottsdale’s water conditions, we are glad to give you a practical recommendation before you purchase.
No. Zest Plumbing & Drain does not charge a trip fee, dispatch fee, or fuel surcharge to come to your home. Whether we are diagnosing a dripping faucet, replacing a cartridge, or installing a new fixture, there is no charge just for the visit. Upfront pricing is provided before any work begins so you know exactly what you are agreeing to. This has been our approach since 2008.
